Septic tank maintenance

How salt can block a cesspool

This article will cover  The first time you turned on your faucet in your newly purchased home when you tried to wash something, did the soap lather up?  You tried to rub your hands or the cloths together but no bubbles seemed to appear. This is a classic sign that your water is hard water. This type of water makes it very difficult to get cleaning chores done. As a practical solution to this challenging situation, water softeners are applied. With water softeners, magnesium and calcium are removed from hard water. When this process is successfully done, you end up using less amounts of soap or detergents (about 50 – 75% less soap). It also relieves the cesspool from heavy loads of organic particles. With soft water, your clothes are much cleaner and water consumption is reduced. As you know, the if there is an excess is water load, the solid particles are stirred up. Their degradation is delayed because of this so they are just pushed into the surrounding soil absorption system. The particles then clog the entire system.

Homeowners should know how salt can block a cesspool. Salt is used as a preservative. It rids organic substances of bacteria so that they could last longer. If water softeners are always used in your home, your cesspool is at risk of having its resident bacteria killed off. It runs on the fact that freshwater bacteria can never survive in saltwater. When this happens, wastewater treatment will be halted because there will be no bacteria left to break down the organic substances. The organic particles will just remain in the cesspool and clog the perforations around it. The particles will be pushed into the surrounding soil absorption area, causing the system to fail.

Other experts say that there are no adverse effects if water softeners are released into cesspools that are properly installed. Some even say that the regeneration that happens in the resin bed paves the way for higher permeability and fewer blockages. However, salt is salt. This compound will always be a foreign substance that should not be in your cesspool at all. Applying water softeners also incorporates more water into your cesspool. You may already know that excessive water load stirs up the solid waste particles in the cesspool. The resident bacteria do not have the time to break them down anymore. So, they stay in the cesspool and get pushed through the perforations, clogging the entire system, often leading to its failure.

To prevent the cesspool blockage caused by salt in water softeners, you should seek the help of your septic expert. Septic experts add special additives to keep your cesspool safe even if you administer water softeners. You should also make sure that you tone down the cleaners that you use in your home. You should opt for environment friendly cleaners. You should take note that regular household cleaners have high amounts of phosphates and other chemicals that harm the resident bacteria. As much as possible, help your cesspool maintain a balanced environment where they could thrive and do their job efficiently. Water softeners should not be used every day. If you allow this to happen, you will have tremendous amounts of salt in your cesspool. It will literally turn into seawater, disabling your wastewater treatment system. With the help of your septic expert, you will be able to enjoy soft water.

With soft water, you will be able to use less water during cleaning chores. You will also save 50 to 70 % less soap or detergents. You will definitely help your budget significantly if you treat soft water properly. You will also save a lot of time considering you won’t have to do the cleaning or washing several times just to get the dirt and grime off. It will also lessen the frustration that you feel about performing chores around the house. Being a homeowner will definitely be much easier if you know how salt from water softeners can block a cesspool.

Comments are closed.